
Monthly Archives: November 2024


Beuchat Maxlux S

WWII Era 1938 Respirator Gas Mask Rubber PBC BW&M Collaro HBS US Military




















WWII Era 1938 Respirator Gas Mask Rubber PBC BW&M Collaro HBS US Military. Used shape as shown, back band plastic piece is hard and cracked as shown, other rubber is pliable, overall really nice shape for age.


Electric Full Face Gas Mask Constant Flow Supplied Air Fed Chemicals Safety Mask












US Supplied Safety Sandblast Helmet Sandblaster Sandblasting Hood Protector. 110PCS Replacement Head Harness Assembly for 3M 6000 series 6100 6200 6300 us. Protective Safety Beekeeping Jacket Veil Suit Bee Keeping Suit Smock USA. Auto Darkening Welding Mask Helmet Welders Arc Tig Mig Grinding Solar Powered US. 1 Pairs 6001CN Organic Vapor Respirator Filter Cartridges For 3m Masks. Bee Keeping Suit Jacket Smock Hat Protective Coat Veil Beekeeping Pull Tops Over. Bee Keeping Suit Protective Coat Pull Tops Beekeeping Smock Jacket Veil Hat Over. AIR FED Supplied Safety Sandblast Helmet Sand Blast Hood Protector +20pcs Lens. Sandblast Helmet Sand Blast Lens Hood Protector Air Groove Replacement US. Anti-fog Shield Full Safety Face Super Protective Head Cover Transparent Mask US. Full Face Gas Mask Survival Nuclear and Chemical 40mm Activated Carbon Filter. For 3M 60923 Multi Gas Vapor Replacement Respirator Cartridge Filter, 1 Pair. Head Harness Assembly Strap Respiratory Replacement 6200 Half Face Mask. Leather Welding Helmet Mask Solar Auto Darkening Filter Lens Welder Hood New US. Solar Auto Darkening Filter Lens Welder Leather Hood Welding Helmet Mask US. For 3M Clear Lens Assembly 6898/37006 Full Face Respirators Replacement Part. Safety Sandblast Helmet Sandblasting Sandblaster Hood Protector Gear+20PCS Lens. Peel off Lens Cover for 3M 6885, 6000, 6700, 6800, 6900 Faceshield 25/50Pack. Anti Wind Sand Blasting Hood Cap / Sandblaster Tools Dust Protective Face Shield. 1PCS 40 MM Replaceable Filter Cartridges Set – P-A-1 Dual Respirator Filters US. 2 Filters 6001CN Organic Vapor Respirator Filter Cartridges For 3m Masks. Emergency Hood Escape Oxygen Mask Respirator Fire Smoke Toxic Protective Filter. 15 IN 1 Gas Mask Full Face Respirator Paint Chemical Spray Facepiece Safety NEW. Chemical Gas Face Mask Face Full Protection Respirator Safety Filter Military US. 1? Reject the sultry, stuffy and breathe more smoothly? 2? Simple operation, strong portability, breathing is not stuffy, not hot? 3? No fog, clearer vision Face screen, low and long operating sound of the fan Long time to wear without noise? 4? Full Charge once Can work continuously for more than 7 hours at a time? 5? Practical supplied fresh air respirator system? 6? Come with the canister unit can filter various harmful gas? 7? The filter can be used for benzene, chlorine gas, acetone, alcohol, aniline, disulphide, carbon tetrachloride, chloroform, bromomethane, chloromethane, chloride, chlorinated sodium chloride? 8? Use the air pump to transport the air to the mask? 9? Allow to fix the air pump on your waist, so you are more close to the air source. Product Name: Gas Mask Respirator First gear: 62 L/min Second gear: 74 L/min about 5-7h per full charged Fullly Charging time:about 3h Built-in battery: 4000mah Battery Type: 18650 Batteries Pack. 1x Full Face Mask 1x Air Pump 2x Air Pipe 1x Canister filter 1x Recharger 1x Cloth bag 1x Paper box. 6001CN Filter Cartridge/5N11 Cotton Filter For 6200 6800 7502 Respirator Filter. For 3M Clear Lens Assembly 6898 Replacement Part Spare for 3M 6700 6800 6900 US. For 3M Clear Lens Assembly 6898 Replacement Part Spare for 3M 6700 6800 6900. 1/2PCS Nose Cup Assembly 6894/37004 Replacement Part for Gas Mask Respirator. For 6800 Nose Cup Assembly 6894/37004 Respiratory Cover Protect Replacement Part. US 6894 NOSE CUP Replacement Part /Assembly 6800/37004 Respiratory Protect Cover. Gas Mask Cotton Filters&Retainer Cartridge Mask Respirator Replace For 6200/6800. For 6200/6800 Gas Mask Cotton Filters&Retainer Cartridge Mask Respirator Replace. Nose Cup Assembly 6894/37004 Respiratory Protect Cover Replacement Part For 6800. 5N11 Cotton Filter /6001CN Filter Cartridge For 6200 6800 7502 Respirator Filter. Clear Lens Assembly 6898/37006 Replacement Part Spare for 3M 6700 6800 6900. For 3M Clear Lens Assembly 6898/37006 Full Face Respirators Replacement Part US. For 3M NOSE CUP Replacement Part /Assembly 6800/37004 Respiratory Protect Cover. 6894 NOSE CUP Replacement Part /Assembly 6800/37004 Respiratory Protect Cover US. 6894 NOSE CUP Replacement Part / Assembly 6800/37004 Respiratory Protect Cover. Lens Clear Assembly 6898/37006 Replacement Part Spare for 3M 6700 6800 6900 US. 2-60 Pairs Filter Retainer Compatible with 5N11 6000 7000 Series US Filter Stock. 2-60 Pairs Filter Retainer Compatible with 5N11 6000 7000 Series Filter US Stock. Retainer Cartridge Mask Respirator&Gas Mask Cotton Filters Replace For 6200/6800. Reusable Full Respirator Face Gas Mask with 40mm Activated Carbon Filter 6800. For 6800 Nose Cup Assembly 6894/37004 Respiratory Protect Cover Replacement Part.


Electric Constant Flow Supplied Air Fed Respirator System Full Face Gas Mask








Full Face Gas Mask Flow Respirator Electric Supplied Air Fed Flow System Device. Performance: This reagent is capable of filtering and absorbing organic gases and vapors such as benzene, toluene, xylene, gasoline, kerosene, chlorine gas, acetone, alcohols, aniline, carbon disulfide, chloroform, bromomethane, nitro compounds, and more. Supplied fresh air respirator system is equipped with portable power source mainly overcome the problems of big air intaking resistance, difficulties in breathing and so on. This system use the air pump to transport the air to the mask. You could fix the air pump on your waist, so you are more close to the air source. The charging time is 3 hours and you could use it for 7 hours with the fully charged battery. The canister comes with the unit can filters a variety of harmful gas. Charging time: 3 hours. Working time: 7 hours. Charger Voltage: 110 V / 220 V. Air supply flow rate: First gear: 62 L/min Second gear: 74 L/min. Net weight of the air pump : 0.6 kg. 1 x air pump. 1 x full face mask. 2 x air pipe. 2 x canister filter. 1 x recharger. Before using the air supply fan, ensure that there is sufficient power and that it is operating normally. Before use, check all connections to ensure they are secure to prevent air leakage that may pose a health hazard to the user. Insert the appropriate length of the hose into the buckle on the safety belt at one end of the face mask. Tighten the belt to secure the long hose to the belt, preventing it from dragging and affecting the proper wearing of the mask. Check the airtightness of the entire system; seal the joint at the end of the air supply fan with your hand to block air intake. If you feel airtight, it indicates that the airtightness of the mask is good. Then insert the hose socket of the air supply fan and simultaneously start the fan to introduce fresh air into the mask for the user to breathe. After each use, wipe the mask, breathing tube, and accessories clean. Coil the long hose and place it in the storage box. The storage environment should be kept dry, ventilated, and away from heat. Avoid contact between the mask lens and organic solvents to prevent damage. Also, try to avoid collisions and friction to prevent scratching the lens surface. Men should shave their beards before wearing the mask to ensure a proper seal. The long hose mask should be stored by designated personnel and inspected regularly. Any issues discovered should be promptly repaired, and damaged components should be replaced as needed. If you detect any unusual odors or a lack of airflow during normal use, please check or replace the filter consumables promptly. When the following situations occur, work should be immediately stopped, and personnel should evacuate the site. Drowsiness due to harmful gases. Detection of the odor of harmful gases. Irritation of the eyes, nose, mouth, or other areas due to harmful gases. Abnormal air flow or cessation of air supply. Shutdown due to power outage, malfunction, or other reasons. This equipment is suitable for various dusty workplaces and is effective in preventing various particulate matter dust, mist, smoke, etc. And odors below permissible levels. It is not suitable for oxygen-deficient working environments (air environments with oxygen levels below 18%), IDLH concentrations (immediately dangerous to life and health), or workplaces where explosive conditions may occur.


North 75SCP100L Combination Gas Vapor P100 Replacement Respirator Cartridge Case







This listing is for one (1) case of 12 units. Each unit contains 2 cartridges.


6Set Gas Mask 6800 Full Face Gas Mask Paint Spray Chemical Safety Mask 16 in 1


Package lists(1 Set): 16 in 1. 1× Face Mask 2× 501 Filter cover 2× 6001 CN Cartridge 10× 5N11 Cotton filter. This mask completely equivalent to 3M 6800 comprehensive protection function, can used 3M filter cotton, high quality products, low prices, very popular! A large number of procurement, has a surprise discount! Full Facepiece Respirator Large lens for wide field of view Lightweight, balanced design Silicone faceseal for greater comfort and durability.


NEW US Military M40 Gas Mask OD Green Medium








M40 Military Issue Gas Mask/Respirator 40MM NATO New Sealed Size Medium. This mask comes with several unique design features suited for first responders. The silicone allows for excellent fit testing results and maximum comfort while the optional butyl rubber second skin protects the face piece increasing respirator life and decreasing decontamination costs. An optional butyl coated nylon hood is available that covers the head and neck and is easily donned to add additional protection against chemical agents (not included). An integral drinking device permits the user to replenish fluids without having to remove the mask (canteen not included). A dual eyepiece format permits the respirator to easily interface with optics and to fold for storage. Condition: New in plastic. Only removed for pictures. Please see pictures as this is the item you will receive. MOD Armory does not export! We reserve the right to obtain an “End User Certificate” requesting proof of US Citizenship for any controlled items. We thank you for your understanding and respect with regards to this policy.


Electric Full Face Gas Mask Constant Flow Respirator Supplied Air Fed System













Electric Full Face Gas Mask Constant Flow Respirator Supplied Air Fed System. The supplied air fresh air respirator system is equipped with a portable power supply, which mainly overcomes the problems of large air intake resistance and difficulty in breathing. The system uses an air pump to deliver air to the mask, which can be attached to the waist, closer to the air source. The canister that comes with the device can filter a variety of harmful gases. Model: XLSF-A1 Input voltage: 110V-220V Input current: 110ma – 300ma Operating temperature: -4? (-20?)-140? (60?) Air supply flow: first gear: 62 L/min; second gear: 74 L/min Charging time: 3 hours Continuous working time: approx 7 hours Working lifetime:? 5000h Air pipe length: 1m Maximum Fitted Air Pipe Length: 30m Connection interface dimensions: RD40(Dia 40cm) Air pump weight: 365g Air pump dimension: 128106106mm. This is primarily intended for use with organic gases and dusts, this is an assistive breathing device; it is not intended for medical use, nor is it an antibacterial filter. The filter can be used for benzene, chlorine, acetone, alcohol, aniline, disulfide, carbon tetrachloride, chloroform, methyl bromide, methyl chloride, chloride, sodium chloride, paint and its derivatives. 1Air pump 1Full face mask 1Charger 1Can filter 2Air pipe. The electric air supply is not stuffy, the breathing is smooth, and the work is easier. The fan has two gears, and it can work continuously for more than 7 hours once charged. It is portable and works more freely. The external control parts of the fan are equipped with dust-proof devices, which have long service life and safer use. We are not responsible for undeliverable address. X’mas or other reasons. Your patience is always appreciated. Dear friend: Welcome to me my services are available: Monday To Friday: 8:30 to 18:00 1. If it’s non-workdays, please kindly be patient and considerable to give us a little more time.


NEW Honeywell SURVIVAIR OPTI-FIT GAS MASK RESPIRATOR 763000



Honeywell 763000 Survivair Opti-Fit Tactical Mask Facepiece with 5-point Strap, Medium. Superior Field of Vision Offers an unobstructed view in critical situations where line of sight vision is essential Full Facepiece Constructed of soft silicone for excellent comfort, fit, and durability Three-position Canister Mounting Adaptable for various applications Anti-scratch Coated Polycarbonate Lens Virtually free of distortion Lens Meets ANSI Z87.1-1989 (R-1998)2 Standard for impact and penetration resistance DIN-threaded 40 mm Connectors Make attaching and removing canisters quick and easy Low Breathing Resistance.
