Tag Archives: constant

Adjustable Gas Mask, Full Face Gas Mask, Electric Constant Flow Respirator

April 3, 2025

Locksmith Tools 3 Pcs 7 Pin Advanced Tubular Lock Tool Set for Padlock Tool. 1 Set Chemical Mask 6800, Dust Mask, Gas Mask Full Face Respirator/Paint Mask. Gas Masks Survival Nuclear and Chemical, Respirator Mask with Filters. Anti-Dust & Fog-Free Face Shield Safety Full Face Protective Head Cover. Leather Welding Hood Welder Mask Breathable Welding Helmet Leather Welding Mask. 7502Chemical Paint Mask Half Face Gas Mask Reusable Respirator Mask With Filters. US Full Face Gas Mask Painting Spraying Respirator w/Filters for 6800 Facepiece. For 3M Clear Lens Assembly 6898 Replacement Part Spare for 3M 6800 6900 6700. 15 In1 6800 Reusable Mask Spray Dust Cover Mask, 1pc Full-face Mask With Filters. USB Powered Electric Smart Water Dispenser Pump Multi-used 306 Rotate Automatic. Half Face Gas Mask Reusable Respirator Mask With Filters7502 Chemical Paint Mask. Stamp Pages For Stamp Album Binder, 1/2/5/7-line Pockets Stamp Collectors US. 42 Pocket Coin Pages for Collectors 10 Sheet Coin Sleeves Holder Stamp Collector. Super Protective Face Shield, Anti-Fog Full Face Shields for Work. 7in1 Half Face Gas Mask 6200 Respirator Safety Protect Painters Respirator. 10pc Thick Glass Tobacco Pipe Reusable One Hitter 105MM Smoking Cigar Tube Pipes. 40mm Gas Mask Filters – Full Face Respirator Mask Cartridge for Paint. Sandblast Helmet Sandblasting Hood AIR Supplied Safety Protective Tool. Peel Off Lens Cover Face Shield Film for 6885 6800 6000 6900 Gas Mask 2550 Pack. Gas Masks Survival Nuclear and Chemical, Respirator Mask with Filters for Dust. Safe Sandblast Helmet Blast Hood Protector Cloak Sand Len AIR for Sandblasting. Leather Welding Jacket, Flame & Heat Resistant Work Welding Protection Coat. 25/50 Pack Peel Off Lens Cover Face Shield Film for 6885 6800 6000 6900 Gas Mask. Tactical Walking Stick Trekking Poles Hiking Camping Survival Outdoor Multi Tool. 1? Reject the sultry, stuffy and breathe more smoothly? 2? Simple operation, strong portability, breathing is not stuffy, not hot? 3? No fog, clearer vision Face screen, low and long operating sound of the fan Long time to wear without noise? 4? Full Charge once Can work continuously for more than 7 hours at a time? 5? Practical supplied fresh air respirator system? 6? Come with the canister unit can filter various harmful gas? 7? The filter can be used for benzene, chlorine gas, acetone, alcohol, aniline, disulphide, carbon tetrachloride, chloroform, bromomethane, chloromethane, chloride, chlorinated sodium chloride? 8? Use the air pump to transport the air to the mask? 9? Allow to fix the air pump on your waist, so you are more close to the air source. Product Name: Gas Mask Respirator First gear: 62 L/min Second gear: 74 L/min about 5-7h per full charged Fullly Charging time:about 3h Built-in battery: 4000mah Battery Type: 18650 Batteries Pack. 1x Full Face Mask 1x Air Pump 2x Air Pipe 1x Canister filter 1x Recharger 1x Cloth bag 1x Paper box. We are always here to help. And all messages will be replied within 24 hours except weekends or American holidays, in case of you re not happy with our products or service, please just contact with no any hesitete, and us side would do our best to service for you to satisfatory always. 6800 Rubber Ring 6800/37004 Respiratory Protection Cover Replacement Part. Weed Puller Weeder Twister Manual Garden Lawn Grass Root Killer Remover Tool. For 3M Clear Lens Assembly 6898 Replacement Part Spare for 3M 6900 6800 6700. Christmas Magnetic Blocks – 120PCS Magnetic Building Blocks Magnetic Tiles Stack. 1/2pcs For 6800 Nose Cup Assembly 6894/37004 Respiratory Cover Replacement Part. M8 Game Stick Retro Game Console 4K HD 2.4G Wireless Controller 64G 20000+ Games. Video Game Sticks M8 Console Dual Wireless Controller Game Stick 4K 20000+Games. Christmas Magnetic Blocks – 64PCS Magnetic Building Blocks Magnetic Tiles Stack. 1/2pcs For 6800 Nose Cup Assembly 6894/37004 Respiratory Protector. 1pc 6800 Rubber Ring 6800/37004 Respiratory Protect Cover Replacement Part. 1/2pcs For 6800 Nose Cup Assembly 6894/37004 Respiratory Protection. 6800 Rubber Ring 6800/37004 Respiratory Protect Cover Replacement Part 1pc. 2-60 Pairs Filter Retainer Compatible with 5N11 6000 7000 Series Filter. 3M 6800 Rubber Ring 6800/37004 Respiratory Protector Cover Replacement Part. Home Garden Weeder Tool Grass Loose Soil Hand Weeding Removal Puller Long Handle. For 3M Clear Lens Assembly 6898 Replacement Part Spare for 3M 6700 6800 6900. For 3M Clear Lens Assembly 6898 Replacement Part Spare for 3M 6700 6900 6800. Filter Retainer Compatible with 5N11 6000 7000 Series Filter 260 Pairs. Portable Air Conditioner Exhaust Hose Tube connector For Exhaust Duct Interface.

Electric Paint Spray Full Face Gas Mask Face Cover Constant Flow Respirators

March 31, 2025

Electric Supplied Air Fed Full Face Gas Mask Constant Flow Respirator System Item Specifics: Product Name: Gas Mask Respirator Air Supply Flow Rate: First gear: 62 L/min Second gear: 74 L/min about 5-7h per full charged Fullly Charging time:about 3h Built-in battery:4000mah Battery Type:18650 Batteries Pack Function: — Equipped with portable power source mainly overcome the problems of big air in-taking resistance, difficulties in breathing, etc. Reject the sultry, stuffy and breathe more smoothly –Simple operation, strong portability, breathing is not stuffy, not hot –No fog, clearer vision Face screen, low and long operating sound of the fan Long time to wear without noise. -Full Charge once Can work continuously for more than 7 hours at a time — Practical supplied fresh air respirator system — Come with the canister unit can filter various harmful gas — The filter can be used for benzene, chlorine gas, acetone, alcohol, aniline, disulphide, carbon tetrachloride, chloroform, bromomethane, chloromethane, chloride, chlorinated sodium chloride, paint and its derivatives — Use the air pump to transport the air to the mask — Allow to fix the air pump on your waist, so you are more close to the air source. 1 x Full Face Mask 1 x Air Pump 2 x Air Pipe 1 x Canister filter 1 x Recharger 1 x Cloth bag 1 x Paper box. We are always here to help. And all messages will be replied within 24 hours except weekends or American holidays, in case of you re not happy with our products or service, please just contact with no any hesitete, and us side would do our best to service for you to satisfatory always.

Electric Constant Flow Supplied Air Fed Respirator System Full Face Gas Mask

March 27, 2025

Full Face Gas Mask Flow Respirator Electric Supplied Air Fed Flow System Device. Performance: This reagent is capable of filtering and absorbing organic gases and vapors such as benzene, toluene, xylene, gasoline, kerosene, chlorine gas, acetone, alcohols, aniline, carbon disulfide, chloroform, bromomethane, nitro compounds, and more. Supplied fresh air respirator system is equipped with portable power source mainly overcome the problems of big air intaking resistance, difficulties in breathing and so on. This system use the air pump to transport the air to the mask. You could fix the air pump on your waist, so you are more close to the air source. The charging time is 3 hours and you could use it for 7 hours with the fully charged battery. The canister comes with the unit can filters a variety of harmful gas. Charging time: 3 hours. Working time: 7 hours. Charger Voltage: 110 V / 220 V. Air supply flow rate: First gear: 62 L/min Second gear: 74 L/min. Net weight of the air pump : 0.6 kg. 1 x air pump. 1 x full face mask. 2 x air pipe. 2 x canister filter. 1 x recharger. Before using the air supply fan, ensure that there is sufficient power and that it is operating normally. Before use, check all connections to ensure they are secure to prevent air leakage that may pose a health hazard to the user. Insert the appropriate length of the hose into the buckle on the safety belt at one end of the face mask. Tighten the belt to secure the long hose to the belt, preventing it from dragging and affecting the proper wearing of the mask. Check the airtightness of the entire system; seal the joint at the end of the air supply fan with your hand to block air intake. If you feel airtight, it indicates that the airtightness of the mask is good. Then insert the hose socket of the air supply fan and simultaneously start the fan to introduce fresh air into the mask for the user to breathe. After each use, wipe the mask, breathing tube, and accessories clean. Coil the long hose and place it in the storage box. The storage environment should be kept dry, ventilated, and away from heat. Avoid contact between the mask lens and organic solvents to prevent damage. Also, try to avoid collisions and friction to prevent scratching the lens surface. Men should shave their beards before wearing the mask to ensure a proper seal. The long hose mask should be stored by designated personnel and inspected regularly. Any issues discovered should be promptly repaired, and damaged components should be replaced as needed. If you detect any unusual odors or a lack of airflow during normal use, please check or replace the filter consumables promptly. When the following situations occur, work should be immediately stopped, and personnel should evacuate the site. Drowsiness due to harmful gases. Detection of the odor of harmful gases. Irritation of the eyes, nose, mouth, or other areas due to harmful gases. Abnormal air flow or cessation of air supply. Shutdown due to power outage, malfunction, or other reasons. This equipment is suitable for various dusty workplaces and is effective in preventing various particulate matter dust, mist, smoke, etc. And odors below permissible levels. It is not suitable for oxygen-deficient working environments (air environments with oxygen levels below 18%), IDLH concentrations (immediately dangerous to life and health), or workplaces where explosive conditions may occur.

Electric Constant Flow Supplied Air Fed Respirator System Full Face Gas Mask

March 24, 2025

Full Face Gas Mask Constant Flow Supplied Air Fed Chemicals Safety Electric

March 20, 2025

Full Face Gas Mask Constant Flow Supplied Air Fed Chemicals Safety Electric. The electric air supply is not stuffy, the breathing is smooth, and the work is easier. The fan has two gears, and it can work continuously for more than 7 hours once charged. It is portable and works more freely. The external control parts of the fan are equipped with dust-proof devices, which have long service life and safer use. The supplied air fresh air respirator system is equipped with a portable power supply, which mainly overcomes the problems of large air intake resistance and difficulty in breathing. The system uses an air pump to deliver air to the mask, which can be attached to the waist, closer to the air source. The canister that comes with the device can filter a variety of harmful gases. Model: XLSF-A1 Input voltage: 110V-220V Input current: 110ma – 300ma Operating temperature: -4? (-20?)-140? (60?) Air supply flow: first gear: 62 L/min; second gear: 74 L/min Charging time: 3 hours Continuous working time: approx 7 hours Working lifetime:? 5000h Air pipe length: 1m Maximum Fitted Air Pipe Length: 30m Connection interface dimensions: RD40(Dia 40cm) Air pump weight: 365g Air pump dimension: 128106106mm. This is primarily intended for use with organic gases and dusts, this is an assistive breathing device; it is not intended for medical use, nor is it an antibacterial filter. The filter can be used for benzene, chlorine, acetone, alcohol, aniline, disulfide, carbon tetrachloride, chloroform, methyl bromide, methyl chloride, chloride, sodium chloride, paint and its derivatives. 1Air pump 1Full face mask 1Charger 1Can filter 2Air pipe. We are not responsible for undeliverable address. X’mas or other reasons. Your patience is always appreciated. Dear friend: Welcome to me my services are available: Monday To Friday: 8:30 to 18:00 1. If it’s non-workdays, please kindly be patient and considerable to give us a little more time.

Protective Electric Constant Flow Supplied Air Gas Mask Respirator System

March 9, 2025

Protective Electric Constant Flow Supplied Air Fed Full Face Gas Mask Respirator System respirator Mask Workplace Safety Supplie.

NEW Electric Constant Flow Supplied Air Fed Respirator System Full Face Gas Mask

March 4, 2025

Electric Constant Flow Supplied Air Fed Respirator System Full Face Gas Mask NEW

February 25, 2025

Electric Full Face Gas Mask Constant Flow Respirator Supplied Air Fed System NEW

February 16, 2025

Electric Full Face Gas Mask Constant Flow Respirator Supplied Air Fed System us. The electric air supply is not stuffy, the breathing is smooth, and the work is easier. The fan has two gears, and it can work continuously for more than 7 hours once charged. It is portable and works more freely. The external control parts of the fan are equipped with dust-proof devices, which have long service life and safer use. Product description: The supplied air fresh air respirator system is equipped with a portable power supply, which mainly overcomes the problems of large air intake resistance and difficulty in breathing. The system uses an air pump to deliver air to the mask, which can be attached to the waist, closer to the air source. The canister that comes with the device can filter a variety of harmful gases. Input current: 110ma – 300ma. Operating temperature: -4? (-20?)-140? (60?). Air supply flow: first gear: 62 L/min; second gear: 74 L/min. Charging time: 3 hours. Continuous working time: approx 7 hours. Air pipe length: 1m. Maximum Fitted Air Pipe Length: 30m. Connection interface dimensions: RD40(Dia 40cm). Air pump weight: 365g. Air pump dimension: 128106106mm. NOTE: This is primarily intended for use with organic gases and dusts, this is an assistive breathing device; it is not intended for medical use, nor is it an antibacterial filter. The filter can be used for benzene, chlorine, acetone, alcohol, aniline, disulfide, carbon tetrachloride, chloroform, methyl bromide, methyl chloride, chloride, sodium chloride, paint and its derivatives. 1Air pump 1Full face mask 1Charger 1Can filter 2Air pipe. X’mas or other reasons. Your patience is always appreciated. Dear friend: Welcome to me my services are available: Monday To Friday: 8:30 to 18:00 1. If it’s non-workdays, please kindly be patient and considerable to give us a little more time. Specification: Model: XLSF-A1 Input voltage: 110V-220V Input current: 110ma – 300ma Operating temperature: -4? (-20?)-140? (60?) Air supply flow: first gear: 62 L/min; second gear: 74 L/min Charging time: 3 hours Continuous working time: approx 7 hours Working lifetime:? 5000h Air pipe length: 1m Maximum Fitted Air Pipe Length: 30m Connection interface dimensions: RD40(Dia 40cm) Air pump weight: 365g Air pump dimension: 128106106mm.

Electric Constant Flow Supplied Air Fed Respirator System Full Face Gas Mask

April 2025
M	T	W	T	F	S	S
« Mar
	1	2	3	4	5	6
7	8	9	10	11	12	13
14	15	16	17	18	19	20
21	22	23	24	25	26	27
28	29	30