3M 6003 / 07047 Organic Vapor Acid Gas Replacement Respirator Cartridge Filters. 5 Packages of 2 Cartridges. NIOSH approved for protection against certain organic vapors or acid gases. Swept-back design allows an enhanced field of view and comfort. Bayonet compatibility allows use with many 3M half and full facepiece designs. Wide range of applications reduces inventory needs. Simple installation and usage requirements reduce training needs. The 3MT Organic Vapor/Acid Gas Cartridge 6003 helps provide respiratory protection against certain organic vapors or acid gases. Use with 3MT Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders. Organic Vapor/Acid Gas Cartridge 6003 helps provide organic vapor and acid gas protection in a variety of environments. When properly used with an approved 3M respirator properly fitted, this respirator cartridge helps provide respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, or hydrogen fluoride. The cartridge may be used for vapor concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepieces. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge is commonly used in the following industries: agriculture, aluminum reduction, chemical manufacturing, laboratories, petrochemical, pharmaceuticals, pulp and paper, and utilities. This organic vapor and acid gas cartridge works with 3M. Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet holders. The cartridge is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors and acid gases. This cartridge is not for use in environments that are immediately dangerous to life or health (IDLH). The cartridge has been assigned the color code “Yellow” in the NIOSH system. NIOSH-approved for respiratory protection against certain gases or vapors. Versatile, ergonomic, and simple to install. Designed to enhance field of view and comfort on the job, these gas/vapor cartridges feature a low-profile, swept-back design. The 3MT Gas/Vapor Cartridges are easy to install. Plus, these cartridges are compatible with 3MT 6000 Series Half Facepieces, 6500/6500QL Series, 7500 Series, 6000 Series Full Facepieces, FF-400 Series, 7800 Series, 3MT ScottT AV- 3000 HT and AV-3000 SureSeal Facepieces with AV-632 Bayonet Adapter, thus helping to reduce inventory needs. 3MT Gas/Vapor Cartridges are designed to balance breathability and long service life. Gas and vapor cartridges use carbon particles to adsorb contaminants, filtering the air that you breathe. 3MT has designed our cartridges to be easy to breathe through and long lasting by optimizing the layers and depth of the carbon bed, geometry of the cartridge body, and carbon particle size. Help protect your workforce. After you’ve determined the contaminants and exposure levels in your work environment, help protect your employees with a properly fitted 3MT Reusable Respirator and corresponding cartridges. 3MT Gas/Vapor Cartridges are NIOSH-approved and help provide respiratory protection from certain gas or vapor concentrations up to 10 times the OSHA Permissible Exposure Limit (PEL) with half facepieces and 50 times the OSHA PEL with quantitatively fit tested full facepieces. Not for use in environments that are immediately dangerous to life or health (IDLH) or contain hazardous levels of airborne particulates. Mining, Oil & Gas. Metal Production & Fabrication.
